歐盟CE認證標準EN 1303《建筑硬件。鎖芯。要求及測試方法》

This European Standard applies to cylinders and their keys for such locks as are normally used in buildings and are designed to be used with cylinders, where the locks have an operational torque of maximum 1,2 Nm. This European Standard specifies performance and other requirements for the strength, security, durability, performance and corrosion resistance of cylinders and their original keys. It establishes one category of use, three grades of durability, three grades for fire and four grades corrosion resistance all based on performance tests as well as six grades of key related security based on design requirements and five grades on performance tests that simulate attack. This European Standard includes tests of satisfactory operation at a range of temperatures. It specifies test methods to be used on cylinders and their protective measures linked with these cylinders and recommended by the manufacturer. Corrosion resistance is specified by reference to the requirements of EN 1670 on corrosion resistance of building hardware. The suitability of cylinders for use on fire or smoke-door assemblies is determined by fire performance tests conducted in addition to the performance testing required by this standard. Since suitability for use on fire doors is not essential in every situation the manufacturer has the option to state if the cylinder conforms to these additional requirements or not. If so claimed, cylinders will comply with the requirements in Annex A. Assessment of fire resistance of grade 1 doors is beyond the scope of this document. On occasions there may be a need for additional functions within the design of the cylinder. Purchasers should satisfy themselves that the products are suitable for their intended use.

Test Item 測試名稱: EN 1303 鎖用圓柱形鎖芯.要求和試驗方法

Test Requirements 測試要求：

4.1 General (Classification) 分級
4.2 Key strength 鑰匙強度
4.3 Durability 疲勞測試
4.4 Door mass 門重
4.5 Fire resistance 防火測試
4.6 Safety 安全
4.7 Corrosion resistance 腐蝕抗性
4.8 Key releted security 鑰匙相關安全
4.8.1 General 總則
4.8.2 Minimum numbers of effective differs 互開率
4.8.3 Minimum numbers of Movable detainers 花牙數
4.8.4 Minimum numbers of identical steps 花牙梯度數
4.8.5 Direct coding on key
4.8.6 Operation of safety mechanism 安全機構操作
4.8.7 Torque resistance opf plug/cylinder relevant to key related security
4.9 Attack resistance 抗攻擊測試
4.9.1 Resistance to attack by drilling 抗鉆
4.9.2 Resistance to attack by chisel 抗鑿
4.9.3 Resistance to attack by twisting 抗扭轉
4.9.4 Resistance to attack by plug/cylinder extraction 抗拉拔
4.9.5 Torque resistance of plug/cylinder relevant to attack resistance 鎖芯的扭轉抗性
7 Marking 標簽

安全機構操作
防扭
防破壞的鎖芯/鎖頭抗扭矩
防鉆
防鏨
極端溫度操作
耐腐蝕
耐用度
鎖芯/鎖頭防拔
鎖芯/鎖頭抗扭矩
鑰匙強度
鑰匙上直接編碼
Zui大同級臺階數
Zui小有效不同牙花數
Zui小止動元件數

Sample Size 樣品數量 / 送樣規格:

(1) 13 pieces of cylinders and their original keys taken randomly (Thereinto, 2 cilynders with their two next closest keys individually, one up and one down) (1) 13 件自由抽取的樣品和它們的原配鑰匙（其中兩個鎖芯每個要帶它們Zui接近牙花的鑰匙兩把）/ (2) Packaging, marking and use instruction (2) 包裝，標簽和使用說明等信息。/ (3) Manufactuer's information indicating numbers of effectives differs, movable detainer and identical steps of key (3) 制造商提供的牙花編排信息，包括牙花數，彈子孔數，彈子級差數

Lead Time / TAT (Turn Around Time) 測試周期:  10 working days (工作天) 25000 cycles 次 / 12 working days (工作天) 50000 cycles 次 / 15 working days 工作天)  100000 cycles 次

Report Summary 報告摘要: