歐盟CE認證標準EN 12209《建筑硬件。機械操作的鎖和鎖定板。要求及測試方法》

This European Standard specifies requirements and test methods for durability, strength, security and functionality of mechanically operated locks and their locking plates: a) for use in doors in buildings; b) for use on fire and smoke compartmentation doors fitted with door closing devices, to enable such doors to close reliably and thus achieve self-closing in the event of fire; and c) for use on locked fire doors to maintain the fire integrity of the door assembly. This European standard covers locks and their locking plates which are either manufactured and placed on the market in their entirety by one producer or produced by more than one producer, or assembled from sub-assemblies produced by more than one producer and designed to be used in combination. This European Standard specifies mechanically operated locks and locking systems intended for use in different environmental and security conditions, thus necessitating different grades. This European standard does not specify Multipoint locks or their locking plates which are specified by prEN 15685. This European Standard specifies the dimensions and properties required for security Assessment of the contribution of the product to the fire resistance of specific fire resistance and/or smoke control door set assemblies is beyond the scope of this European Standard.

Test Item 測試名稱: BS EN 12209 Building hardware. Mechanically operated locks and locking plates. Requirements and test methods 建筑五金-鎖具要求和測試方法

Test Requirements 測試要求：

5.1 General
5.1.1 Dangerous substances
5.1.2 Return force of latch bolt
5.2 Category of use
5.2.1 Resistance to side load on latch bolt
5.2.2 Torque to operate deadbolt
5.2.3 Strength of normal latch action and stops
5.2.4 Torque resistance of rim lock with lockable handle/knob
5.3 Durability
5.3.1 Durability of latch action
5.3.2 Durability of deadbolt mechanism
5.3.3 Durability of locking snib mechanism
5.4 Door mass and closing force
5.5 Suitability for use on fire/smoke doors
5.7 Corrosion resistance and temperature
5.8 Security
5.8.1 Torque resistance of knob
5.8.2 Resistance to side load
5.8.3 Deadbolt projection
5.8.4 Resistance to end load on deadbolt
5.8.5 Resistance to pulling of hook/claw bolt
5.8.6 Resistance to disengaging of hook/claw bolt
5.8.7 Resistance to forcing of locating device in sliding door locks
5.8.8 Resistance to pullinf off of knob on bored lock and latch set
5.8.9 Resistance to security reguirements for the locking plate
5.10 Key operation and locking
5.10.1 Strength of key 鑰匙強度
5.10.2 Deadlocking
5.10.3 Torque to withdraw the latch bolt with key
5.11 Spinder operation
5.11.1 Torque to withdraw the latch bolt with handle
5.11.2 Strength of bolt actions
5.11.3 Minimum follower restoring torque
5.12 Key identification requirement
5.12.1 Detaining elements
5.12.2 Effective differs
5.12.3 Differing step heights on key
5.12.4 Non-interpassing of keys with just one interval differ
5.12.5 Coding protection
7 Marking

編碼保護
撥動件回復扭矩Zui小值
撥動件縮回斜舌扭矩
操作呆舌扭矩
從門上防拆卸保護
呆舌側向載荷
呆舌端部載荷
呆舌機構耐用度
呆舌伸出長度
帶鎖閉執手/執手球的外裝門鎖抗扭矩
帶中間鎖閉位置的手動鎖閉
防鉆和呆舌側向載荷
防鉆和呆舌端部載荷
鉤/爪舌抗拉力
鉤/爪舌抗脫力
關門力
極端溫度操作
僅一級牙花不同的鑰匙間無互開
耐腐蝕
球形鎖和碰鎖裝置執手球防拉脫
球形鎖和碰鎖裝置執手球或彎形執手抗扭矩
手動鎖閉
鎖扣板側向載荷
鎖扣板抗拉力
鎖扣板抗提力
鎖扣盒端部載荷
鎖舌機構強度
外裝門鎖執手球或彎形執手抗扭矩
斜舌側向載荷
斜舌回復力
斜舌機構耐用度
旋鈕鎖閉機構耐用度
移門鎖定位裝置抗外力
有效不同數
鑰匙不同臺階高度數
鑰匙強度
鑰匙縮回斜舌扭矩
正常斜舌機構和制動部件強度
止動元件
自動鎖閉呆舌
自動鎖閉斜舌

Sample Size 樣品數量 / 送樣規格: 26pcs
Lead Time / TAT (Turn Around Time) 測試周期: 常規服務 Regular service 15 working days

Report Summary 報告摘要: