ISO 4210 標準城市自行車測試

	更新時間 2025-01-08 20:00:00 價格請來電詢價測試周期 5-7天寄樣地址深圳寶安價格費用電話詳談聯系電話 17324413130 聯系手機 17324413130 聯系人羅卓文立即詢價

詳細介紹

Test item 測試名稱: 城市自行車 City and trekking bicycles

Norm refer: EN 14764

Test info 測試內容：

4.2	Sharp edges 利邊
4.3	Security and strength of safety-related fasteners 安全緊固件強度測試
4.4	Crack detection methods 裂縫探測方法
4.5	Protrusions 突出物
4.6	Brakes 剎車
4.7	Steering 操縱系統
4.7.1	Handlebar - Dimensions尺寸
4.7.2	Handlebar grips and plugs 車把手握把和插銷
4.7.3	Handlebar stem -insertion-depth mark or positive stop車把手立管插入深度標記
4.7.4	Handlebar stem -extension to fork-stem-clamping requirements車把手立管延伸處裝夾要求
4.7.5	Steering stability 操縱穩定性
4.7.6	Steering assembly-Static strength and security tests 靜態強度及牢固性
4.7.7	Handlebar and stem assembly - Fatigue test 把手及立管疲勞
4.8	Frame 車架
4.8.1	Suspension frame - Special requirements 特殊要求
4.8.2	Impact test (Falling mass) 沖擊測試
4.8.3	Frame-Fatigue test with pedalling forces 車架動態搖擺
4.8.4	Frame-Fatigue test with a vertical force 垂直力疲勞
4.9	Front fork 前叉
4.9.1	General 一般要求
4.9.2	Means of location of the axle 前叉軸之要求
4.9.3	Suspension fork - Special requirements 特殊要求
4.9.4	Front fork - Static bending test 靜態彎曲測試
4.9.5	Front fork - Rearward impact test 向后沖擊測試
4.9.6	Front fork - Bending fatigue test 彎曲疲勞測試
4.9.7	Forks intended for use with hub - or disc brakes 使用於花鼓或碟式煞車之前叉
4.1	Wheels and Wheel/tyre assembly輪子
4.10.1	Rotational accuracy 真圓度
4.10.2	Wheel/tyre assembly - Clearance 輪子間隙
4.10.3	Wheels - Static strength test 輪子靜態強度測試
4.10.4	Wheels - Wheel retention 輪子保持力測試
4.10.5	Wheels - Quick release mechanisms 快卸機構
4.11	Rims , Tyres and tubes 輪緣, 輪胎
4.12	Mudguards 擋泥板
4.13	Pedals and pedal/crank drive system 踏板和曲柄
4.13.1	Pedal tread 踏板面
4.13.2	Pedal clearance 踏板間隙
4.13.3	Pedal/pedal spindle assembly - Static strength test 踏板/踏板軸組件 - 靜態強度
4.13.4	Pedal spindle - Impact test 踏板軸沖擊
4.13.5	Pedal/pedal spindle - Dynamic durability test 踏板/踏板軸組件 -動態疲勞測試
4.13.6	Drive system - Static strenght test 傳動系統強度
4.13.7	Crank assembly - Fatigue test 曲柄組疲勞測試
4.14	Saddles and seat-pillars 座墊和座墊軸
4.14.1	General 一般要求
4.14.2	Limiting dimensions 尺寸
4.14.3	Seat pillar insertion mark 座墊軸插入深度記號
4.14.4	Saddle/seat pillar - Security test 座墊和座墊軸強度
4.14.5	Saddle - Static strength test 座墊軸靜態強度
4.14.6	Saddle and seat-pillar clamp-Fatigue test座墊及座桿疲勞測試
4.14.7	Seat pillar - Fatigue test 座墊軸疲勞測試
4.15	Drive-chain 傳動鏈條
4.16	Chainguard 鏈條蓋
4.17	Spoke connector 輪輻連接器
4.18	Luggage carriers 行李架
4.19	Handling and operation of a fully-assembled bicycle 路況測試
4.2	Lighting systems and reflectors照明系統及反射鏡
4.21	Warning device報警裝置
5	Instructions 說明書
6	Marking 標簽
Informative items
Annex B	Steering geometry 掌舵部分幾何圖
Annex C	Structural intergrity of the fully assemblyed bicycle整車綜合強度測試
Annex D	Wheel/tyre assembly - Fatigue test 輪子輪胎疲勞測試