IEC 60332-1-3《著火條件下的電力和光纖電纜試驗 - 第 1-3 部分：單根絕緣電線或電纜的垂直火焰傳播試驗》

	更新時間 2025-01-09 20:00:00 價格請來電詢價測試周期 5-7天寄樣地址深圳寶安價格費用電話詳談聯系電話 17324413130 聯系手機 17324413130 聯系人羅卓文立即詢價

詳細介紹

標準編號 Standard/Code	標準名稱 Standard Title
IEC 60332-1-3	Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

IEC 60332-1-3 Specifies a test procedure for assessment of falling flaming droplets/ particles when a single vertical electrical insulated conductor or cable, or optical fibre cable, is subjected to defined fire conditions. NOTE - Testing to IEC 60332-1-3 may be performed simultaneously with that to IEC 60332-1-2, if required. Recommended requirements for performance are given in Annex A. IEC 60332-1-3 specifies the use of a 1 kW pre-mixed flame and is for general use, except that the procedure specified may not be suitable for the testing of small single insulated conductors or cables of less than 0,5 mm2 total cross-section because the conductor melts before the test is completed, or for the testing of small optical fibre cables because the cable is broken before the test is completed.

IEC 60332-1-3 規定了當單個垂直電絕緣導體或電纜或光纖電纜受到規定的火災條件時評估下落的燃燒液滴/顆粒的測試程序。注：如果需要，IEC 60332-1-3 測試可以與 IEC 60332-1-2 測試同時進行。推薦的性能要求在附錄 A 中給出。IEC 60332-1-3 規定使用 1 kW 預混合火焰，適用于一般用途，但規定的程序可能不適用于小型單絕緣導體的測試或總橫截面積小于 0.5 mm2 的電纜，因為導體在測試完成前熔化，或用于測試小型光纖電纜，因為電纜在測試完成前斷裂。

Test Requirement 測試要求：

Sample Size 樣品數量 / 送樣規格: 5m
Lead Time / TAT (Turn Around Time) 測試周期: 常規服務 Regular service 9 working days

Report Summary 報告摘要:

相關產品