歐盟CE認證標準EN 635-2《膠合板 - 按表面外觀分類 - 第 2 部分：硬木》

	更新時間 2025-01-07 20:00:00 價格請來電詢價測試周期 5-7天寄樣地址深圳寶安價格費用電話詳談聯系電話 17324413130 聯系手機 17324413130 聯系人羅卓文立即詢價

詳細介紹

標準編號 Standard/Code	標準名稱 Standard Title
EN 635-2	Plywood - Classification by surface appearance - Part 2: Hardwood

This European Standard specifies the nature and limits of characteristics inherent in wood and manufacturing defects enabling the visual assessment of theplywood for allocation to an appearance class. This classification is a contribution to assessing the finishing suitability of plywood. This part of EN 635 applies to plywood, the surface veneers of which are made from hardwood species. It does not apply to overlaid panels.

Test Requirement 測試要求：

3.2.1 Classification according to characteristics inherent in wood 根據木材固有的特性進行分級
3.2.1.1 Pin knots 針節
3.2.1.2 Sound intergrown knots 光滑的活節
3.2.1.3 Unsound or non-adhering knots and knots holes 非光滑或非粘合的節以及節洞
3.2.1.4 Splits 裂縫
3.2.1.5 Abnormalities due insects, marine borers and parasitic plants 由昆蟲，鑿船蟲以及寄生物引起的木材異常
3.2.1.6 Inbark 內皮
3.2.1.7 Irregularities in the structure of the wood 木材結構的不規則
3.2.1.8 Discoloration which is not wood destroying 非木材損壞引起的變色
3.2.1.9 Fungal decay, which is wood destroying 木材損壞引起的真菌腐爛
3.2.1.10 Other characteristics 另外的特性
3.2.2 Classification according to manufacturing defects 根據制造缺陷進行分級
3.2.2.1 Open joints 開口接合
3.2.2.2 Overlaps 重疊
3.2.2.3 Blisters 水泡
3.2.2.4 Hollows, imprints and bumps 凹痕，烙印及撞痕
3.2.2.5 Roughness 粗糙度
3.2.2.6 Sanding through 砂紙打磨痕
3.2.2.7 Glue penetration 膠水滲透
3.2.2.8 Foreign particles 雜志粒子
3.2.2.9 Repairs 修理
3.2.2.10 Defects at the edges of the panel due to sanding or sawing 由于打磨或鋸切引起的木板邊緣缺陷
3.2.2.11 Other characteristics or defects 另外的特性或缺陷