歐盟標準 EN 14781 競賽自行車測試

	更新時間 2024-12-27 20:00:00 價格請來電詢價測試周期 5-7天寄樣地址深圳寶安價格費用電話詳談聯系電話 17324413130 聯系手機 17324413130 聯系人羅卓文立即詢價

詳細介紹

Test Name 測試名稱: 競賽自行車 Racing bicycles

Test Info 測試內容:

Sharp edges 銳邊

Security and strength of safety-related fasteners 與安全有關的緊固件的可靠性和強度

Crack detection methods 裂縫的檢測方法

Protrusions 突出物

Brakes 車閘

4.6.1 Braking-systems 制動系統

Asbestos examination of brake-blocks 閘皮石棉測試

4.6.2 Hand-operated brakes 手閘

4.6.3 Attachment of brake assembly and cable requirements 車閘部件的安裝和鋼繩的要求

4.6.4 Brake-block and brake-pad assemblies-security test 閘皮和閘盒組合件-強度測試

4.6.5 Brake adjustment 車閘的調整

4.6.6 Hand-operated braking system- strength test 手閘制動系統-強度測試

4.6.7 Back-pedal braking system 腳閘制動系統

4.6.8 Braking performance 制動性能

4.6.9 Brakes-heat-resistance test 車閘-耐熱測試

Steering 車把

Handlebar - Dimensions 把橫管-尺寸

Handlebar grips and plugs 把橫管的把套和把蓋

Handlebar stem -insertion-depth mark or positive stop 把立管-插入深度標記或有效檔塊

Handlebar stem -extension to fork-stem-clamping requirements 把接頭橫管延伸部對前叉立管-夾緊要求

Steering stability 車把穩定性

Steering assembly-Static strength and security tests車把部件-靜負荷強度和可靠性測試

4.7.6.1/4.7.6.2 Handlebar-stem-lateral bending tests 把立管-側向彎曲測試

4.7.6.3 Handlebar-stem-forward bending test 把立管-向前彎曲測試

4.7.6.4 Handlebar to handlebar-stem-torsional security test 把橫管對把立管-扭矩安全測試

4.7.6.5 Handlebar-stem to fork-stem-torsional security test 把立管對于前叉立管-扭矩安全試驗

4.7.6.6 Bar-end to handlebar-torsional security test 把端把對把橫管-扭矩安全測試

Handlebar and stem assembly - Fatigue test 把橫管和把立管組合件 - 疲勞測試

Frame 車架

Suspension frame - Special requirements 避震車架-特殊要求

Impact test (Falling mass) 車架和前叉組合件-沖擊測試(落重)

Impact test (Falling frame) 車架和前叉組合件-沖擊測試(落架)

Frame-Fatigue test with pedalling forces 車架-腳蹬力疲勞測試

Frame-Fatigue test with a horizontal force 車架水平力疲勞測試

Front fork 前叉

General 總則

Means of location of the axle 前軸和前輪的夾緊定位方式

Suspension fork - Special requirements 避震前叉-特殊要求

Front fork - Static bending test 前叉-靜彎曲測試

Front fork - Rearward impact test 前叉-向后沖擊測試

Front fork - Bending fatigue test 前叉-彎曲疲勞測試

Forks intended for use with hub - or disc brakes 用于輪轂閘或盤閘的專用前叉

Tensile test for a non-welded fork 非焊接前叉拉力測試

Wheels and Wheel/tyre assembly 車輪和車輪/輪胎組合件

Rotational accuracy 轉動精度

Wheel/tyre assembly-concentricity tolerance 車輪/輪胎組合件-徑向圓跳動公差

Wheel/tyre assembly-lateral tolerance 車輪/輪胎組合件-軸向圓跳動公差

Wheel/tyre assembly - Clearance 車輪/輪胎組合件-間隙

Wheels - Static strength test 車輪-靜負荷測試

Wheels - Wheel retention 車輪-車輪的夾持

Wheels - Quick release mechanisms 車輪-快卸機構

Rims , Tyres and tubes 輪輞、外胎和內胎

Pedals and pedal/crank drive system 腳蹬和腳蹬/曲柄驅動系統

Foot retention 腳套

Pedal clearance 腳蹬間隙

Pedal/pedal spindle assembly - Static strength test 腳蹬和腳蹬軸組合件-靜符合測試

Pedal spindle - Impact test 腳蹬軸-沖擊測試

Pedal/pedal spindle - Dynamic durability test 腳蹬/腳蹬軸-動態耐久性測試

Drive system - Static strenght test 驅動系統-靜負荷測試

Crank assembly - Fatigue test 曲柄組合件疲勞測試

Saddles and seat-pillars 鞍座和鞍管

General 總則

Limiting dimensions 限制尺寸

Seat pillar insertion mark 鞍管-插入深度標記或有效檔塊

Saddle/seat pillar - Security test 鞍座/鞍管-安全性測試

Saddle - Static strength test 鞍座-靜負荷測試

Saddle and seat-pillar clamp-Fatigue test 鞍座和鞍座夾緊裝置 - 疲勞測試

Seat pillar - Fatigue test 鞍管疲勞測試

Drive-chain 驅動鏈條

Chainguard 鏈罩

Spoke connector 輻條保護盤

Lighting systems and reflectors 照明系統和反射器

Warning device 鳴號裝置

Handling and operation of a fully-assembled bicycle 裝配完善的自行車的操縱和行駛

Instructions 制造商說明書

Marking 標記

Steering geometry 車把幾何位置

Structural intergrity of the fully assemblyed bicycle 裝配完善的自行車結構強固性

Wheel/tyre assembly - Fatigue test 車輪/輪胎部件-疲勞測試

Lead Time 測試周期: 常規 Regular 20 working days

Sample Size 送樣規格:

2 sets of fully assembled bicycle, 4 pcs of brake pad (if applicable), 3 pcs of fork, 4 sets of frame & fork assembly, 4 pcs of chain, 3 set of handlebar & stem assembly, 2 set of crank assembly, 2 pcs of pedal, 4 pcs of bell (if appicable), 2 addtional pcs of fork for disc brake/hub brake

整車2套,閘皮4塊(若適用),前叉3支,車架前叉組件3套,鏈條4根,把橫管/把立管組件3套,曲柄組件2套,車鈴4件(若適用),額外2支前叉(輪轂閘或盤閘)

Others 其他信息:

Responsive image