美國標準 ASME A 112.18.1衛浴供水配件測試

Test item 測試名稱：  Plumbing Supply Fittings 衛浴供水配件

Norm refer 涉及標準:  CSA B 125.1

Test info 測試內容：ClauseTest Requirement　Shower Head (淋浴頭）physical part / 物理部分 （no moving parts)　Shower Head (淋浴頭）physical part / 物理部分 （with moving parts)　Hand Shower (手持花灑）physical part / 物理部分 （no moving parts)　Hand Shower (手持花灑）physical part / 物理部分 （with moving parts)　Shower hose (花灑軟管)（No NSF part）/ physical part / 物理部分　Stop Valve (供水閥）physical part / 物理部分 　Faucet （水龍頭）physical part / 物理部分  （normal）　NSF PART (Metal Only)　NSF PART (Metal and Organic Material)4Design Requirements 設計要求4.1.1Rated pressure 額定壓力4.1.2Rated temperature 額定溫度4.1.3Seating members 可替換的底座4.2Servicing 維修4.3Installation 安裝4.4Threaded connections 螺紋連接4.5Connections other than threaded connections 螺紋以外的連接4.6Accessible design 易操作設計4.8Cover plates and escutcheons 安裝蓋4.9Toxicity 毒性分析4.1Frost-proof faucet and hydrants 防結霜水龍頭以及消防龍頭4.11Shower heads, body spray, and hand-held showers 淋浴頭、淋浴噴嘴以及手持淋浴裝置4.12Cross-flow 交叉流4.13Fittings incorporating electrical features 帶電的配置4.14Materials 材料　Copper alloy 銅合金　Stainless steel alloy 不銹鋼合金4.15Automatic compensating valve temperature control 自動溫度補償閥門4.16Lawn and sediment faucets 草坪以及沉積水龍頭5Performance requirements and test methods 性能要求以及測試方法5.2Coatings 鍍層5.2.2Corrosion （all substrates and coatings） 腐蝕測試（所有的基體與鍍層）5.2.3Adhesion 粘附力5.2.3.2Electrodeposited and PVD coatings on metals 金屬基體上的電鍍層以及PVD鍍層5.2.3.3Electrodeposited and PVD coatings on plastics 塑料基體上的電鍍層以及PVD鍍層5.2.3.4Organic coatings 有機鍍層5.2.4Decorative organic coatings 裝飾用的有機鍍層5.2.4.2Water degradation 水退化5.2.4.3Soap and cleaner effects 耐堿以及耐清潔5.2.4.4Abrasion resistance 耐磨性5.3Pressure and temperature 壓力以及溫度5.3.1Static and dynamic seals 靜態以及動態的密封性能5.3.2Burst pressure 爆破壓力5.3.3Cross-flow check valves 交叉流檢查閥門5.3.4Hose assemblies 軟管配件5.3.5Ball joint 球窩接頭5.3.6Diverters 分流器5.3.6.1diverters for bath and shower 浴盆以及淋浴分流器5.3.6.2diverters for kitchen and lavatory 廚房水槽以及洗臉盆分流器5.4Flow rate 流速測試 5.6Life cycle 壽命測試（500000 cycles）(臺盆、水槽龍頭)　250000 cycles （浴室、花灑龍頭）　150000 cycles（自關龍頭）　50000 cycles （婦洗器龍頭）　10000 cycles （花灑頭、花灑軟管調節）　2000 cycles（供水閥）5.7Resistance to installation loading 抵抗安裝負荷5.7.1Bending strength 抗彎強度5.7.2Thread torque strength 扭力測試5.8Resistance to use loading 抵抗使用負荷5.8.1Operating control 操作控制5.8.2Maintenance of installed position 安裝位置的維護5.8.3Swing spout strength 擺動噴嘴強度5.9Backflow prevention 防逆流性 5.1Automatic compensating valve 自動補償閥門6Marking 標識NSF 部分的樣品要求： Metals only: 3 pcs of samples, 7-9 weeksOrganics only: 1 pc (see note)" 7-9 weeksComplete test 4 pcs (see note); 7-9 weeksNote: the sample No. for the organic test is base on the water volume of the faucet. If the faucet can hold not less than 150 ml water, we will only need 1 sample. If less than that, you will need to provide more samples which can give us the 150 ml water volume.                                                   其他部分的樣品要求：5 sets of samples with installation instruction and drawing.The TAT shall be 4 weeks.

Sample for reference 參考圖片:

Sample Report 報告樣本：