加入收藏
在線留言
聯系我們

              

關注微信

              

手機掃一掃
立刻聯系商家

              

              

              

              

              


              

              

              


              

                
              羅工17324413130
              

              

              

              

              

              

              

              

              

              塑料浴缸以及淋浴底盤美國標準ANSI Z 124.1.2詳細解讀
              


              

              


              


              

              

              

              


              

              

              

              

              


              

              


              

              更新時間
              2024-12-26 20:00:00
              價格
              請來電詢價
              測試周期
              5-7天
              寄樣地址
              深圳寶安
              價格費用
              電話詳談
              聯系電話
              17324413130
              聯系手機
              17324413130
              聯系人
              羅卓文
              立即詢價

              詳細介紹


              Test item 測試名稱: 
              American National Standard for Plastic Bathtub and Shower Units 塑料浴缸以及淋浴底盤美國標準
              Norm refer 涉及標準: IAPMO
              Test info 測試內容： 
              ClauseTest Requirement
              2General requirement 一般要求
              2.1Material 材料
              2.2Dimensional tolerances 尺寸
              2.3Units for testing 測試單元
              2.4Installation instruction 安裝說明
              2.5Care and maintenance instruction保養維護說明
              2.6Identification 鑒別
              2.7Grab bars 扶手
              2.8Raised flanges and tiling beads. 輪廓
              3Workmanship and finish 表觀工藝
              4Structural integrity of complete units (all types) 
              4.2Drain fitting connection 排水部件連接
              4.3Point impact loads 點沖擊
              4.4Loads on seat 座椅負載測試
              4.5Loads on rim and bottom of bathtubs, and on threshold and bottom of showers
              4.6Area impact load on wall surrounds 墻面沖擊
              4.7Loads on wall surrounds 墻體負載
              4.8Radii load test 倒角負載
              4.9Loads on unsupported bathtub areas 不承重區域負載
              5Physical characteristics of materials (all types) 材料的物理性狀
              5.1Colorfastness test 褪色測試
              5.2Stain resistance test 抗污性測試
              5.3Wear and cleanability test 磨耗與清潔能力測試 (轉包美國）
              5.4Cigarette test 香煙測試
              5.5Chemical resistance test 抗化學測試
              5.6Ignition test 燃燒測試
              5.7Thermal shock resistance 熱沖擊測試
              6Additional material tests  附加材料測試
              6.1Hot water resistance test method (type 1,2and3) 
              6.2Laboratory test for non-integral flange-fixture seal (if applicable)
              6.3Resistance to fungl and bacteria growth (type 6) (35 working days)
              6.4Puncture resistance test (type 6)
              Sample Size: 2 set（With installation instruction & care and maintenance instruction.）
                                  3 pieces of specimens with 305 X 305 mm;
                                  3 pcs of samples with size 4” X 15”;
                                  3 pcs of  6” X 6” pieces of material 
              (If clause 6.3 is applied, 4 pieces of 50 X 50 mm specimens shall be needed.)
              TAT: 22 working days
              (If clause 6.3 is applied, the TAT shall be 37 working days.)
               
              Sample for reference 參考圖片:
              Responsive image
              Responsive image
               
              Sample Report 報告樣本：
              Responsive imageResponsive image

               
              

              

              

              聯系方式
              • 電　　話：17324413130
              • 檢測工程師：羅卓文
              • 手　　機：17324413130