美國FCC認證和FCC ID認證獲證后標簽該怎么打？

公司新聞

發布時間： 2023-02-27 21:57 更新時間： 2024-12-26 20:00

觀看美國FCC認證和FCC ID認證獲證后標簽該怎么打？視頻

FCC認證和FCC ID認證獲證后標簽該怎么打？

FCC介紹
FCC是美國聯邦通信委員會（Federal Communication Commission）的縮寫。FCc認證是美國強制性認證，主要針對9kHz-3000GHz的電子電氣產品，涉及無線電、通信等各方面無線電干擾問題。FCC管制的產品涵蓋AV、IT、無線電產品及工科醫設備等。

FCC 認證類型	認證方式
FCC Supplier's Declaration of Conformity(SDoC)	制造商或進口商確保其產品在實驗室按照法規要求進行必要檢測，以確保產品符合相關的技術標準并保留檢測報告，FCC有權要求制造商提交設備樣品或產品的檢測數據。產品需有美國本土責任方，無美國本土責任方的設備，需申請FCCID為替代認證方法。責任方需出具符合聲明文檔。
FCC Certification（即FCC ID）	產品需通過FCC授權的實驗室測試，取得測試報告后，整理產品的技術資料，包括：產品細節照片、電路圖、原理方框圖、使用手冊等，連同測試報告一起送到FCC認可的發證機構TCB審核批準。TCB確認所有資料無誤后頒發證書，并授權申請方使用FCC ID。對于第一次申請FCC認證的客戶，須首先向FCC申請一個編號GRANTEE CODE（公司編號）。產品通過測試和認證后，在產品上標注FCCID。

FCC認證類型:強制性

當地電壓：110V 60Hz

工廠檢查：無

證書有效期：無

FCC標簽格式

FCC SDOC聲明標識：

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received,
including interference that may cause undesired operation.

1.供應商符合聲明（SDoC）標志：
產品、包裝或說明書上必須有如上FCC聲明標識。
產品標簽上可自愿打上FCC Logo。

FCC ID標簽格式

需要體現：制造商，產品名稱，型號，規格等基本信息；FCC/ICID號碼（必須）FCC ID=Grantee Code +Product Code

以及This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation的聲明（如果由于產品尺寸原因，無法在Lablel上體現如上聲明，則必須在使用說明書和包裝或可移動標簽上體現）

注：使用說明書-FCC使用說明書上必須包含如下警語

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device，pursuant to part 15of the FCC Rules.These limits are designed to provide reasonable protection aqainst harmful interference in a residential installation.This equipment generates，uses and can radiate radio frequency energy and，if not installed and used in accordance with the instructions，may cause harmful interference to radio communications.However，there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception，which can be determined by turning the equipment off and on，the user is encouraged to try to correct the interference by one or more of the following measures：-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna（s）used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

其他新聞